Transmission Housing Oil Seal Replacement Rear Seal

Tools Required

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the rear propeller shaft. Refer to Two-Piece Propeller Shaft Replacement in Propeller Shaft.



3. Remove the rear oil seal from the rear case using the J 6125-1B (1) and the J 23129 (2).
4. Remove the rear oil seal from the extension housing.

1. Using the J 36503 install the new rear oil seal.
2. Install the rear propeller shaft. Refer to Two-Piece Propeller Shaft Replacement in Propeller Shaft.
3. Check the transmission oil level. Refer to Fluid Replacement .
4. Lower the vehicle.