GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2000
🢒
S10 Pickup - 4WD
🢒
Engine
🢒
Engine Cooling
🢒 Power Steering Pump Pulley Replacement
Tools Required
•
J 25034-C
Power Steering Pump Pulley Remover
•
J 25033-C
Power Steering Pump Pulley Installer
Removal Procedure
Remove the fan clutch. Refer to
Fan Clutch Replacement
in Engine Cooling.
Remove the drive belt. Refer to
Drive Belt Replacement
in Engine Mechanical 2.2L or
Drive Belt Replacement
in Engine Mechanical 4.3L.
Remove the power steering pump pulley using
J 25034-C
.
Installation Procedure
Place the power steering pump pulley on the end of the power steering pump shaft.
Install the power steering pump pulley using
J 25033-C
.
Ensure that the power steering pump pulley (1) is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
Install the drive belt. Refer to
Drive Belt Replacement
in Engine Mechanical 2.2L or
Drive Belt Replacement
in Engine Mechanical 4.3L.
Install the fan clutch. Refer to
Fan Clutch Replacement
in Engine Cooling.