GM Service Manual Online
For 1990-2009 cars only
Makes
๐ข
Chevrolet
๐ข
2000
๐ข
S10 Pickup - 2WD
๐ข
HVAC
๐ข
HVAC Systems - Automatic
๐ข Blower Motor Control Module Replacement
Removal Procedure
Disconnect the pigtail harness connectors (1 and 2) from the blower motor.
Disconnect the electrical connector (4) from the blower motor control module (2).
Remove the blower motor control module mounting screws (1).
Remove the blower motor control module (2) from the blower case.
Installation Procedure
Install the blower motor control module (2) to the blower case.
Install the blower motor control module mounting screws (1).
Tighten
Tighten the screws to 1.9 Nยทm (17 lb in).
Connect the electrical connector (4) to the blower motor control module (2).
Connect the pigtail harness connectors (1 and 2) to the blower motor.