GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 591215  Size: SH
  1. Push the fabric from the rear seat cushion to expose the arm rest retaining bolts (1).

  2. Object Number: 591218  Size: SH
  3. Remove the retaining bolts (3).
  4. Remove the arm rest (5).

Installation Procedure


    Object Number: 591218  Size: SH
  1. Install the arm rest (5).
  2. Install the retaining bolts (3).
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    Tighten
    Tighten the retaining bolts (5) to 15 N·m(11 lb in).