Removal Procedure
- Disable the SIR system. Refer to Disabling the SIR System.
- Remove the defroster grille. Refer to Defroster Grille Replacement.
- Remove the end caps. Refer to IP Endcap Replacement.
- Remove the instrument cluster trim plate. Refer to IP Cluster
Replacement.
- Remove the heating, ventalation and air conditioning assembly
control retaining screws.
- Remove the bulb sockets (1)
by turning clockwise.
- Pull the bulbs from the sockets.
Installation Procedure
- Install the bulbs.
- Install the sockets (1).
- Install the heating, venting and air conditioning screws.
Tighten
Tighten the heating, ventalation and air conditioning assembly control
screws to 2 N·m(18 lb in).
- Install the instrument panel cluster trim plate. Refer to IP Cluster
Replacement.
- Install the end caps. Refer to IP Endcap Replacement.
- Install the defroster grille. Refer to Defroster Grille Replacement.
- Enable the SIR. Refer to Enabling the SIR System.