| Subject: | Reattachment Procedure for Loose Power Outside Rearview Mirror Module |
| Models: | 1996-2000 Toyota Cavalier |
If a condition is encountered where the power folding outside
rearview mirror module, attached to the right side kick panel area, becomes
disengaged from the original attachment, reattach the module to the original
mount and use plastic tie straps to provide additional support using the following
procedure:
| • | Place one plastic tie strap around the wiring harness for the
power folding mirror module, just below the connector.
|
| • | Using two additional tie straps, loop them through
the first tie strap, in front of the module and over the dash wiring harness,
which is located above the power folding mirror module. The power folding
mirror module is then supported by the dash wiring harness and held to the
right side kick panel by the original attachment.
|
