GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Optra 🢒 Engine 🢒 Engine Controls and Fuel - 1.8L (LDA) 🢒 Engine Control Module Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1701061 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the air intake tube and resonator.
  3. Disconnect the engine control module (ECM) connectors from the ECM.
  4. Remove the ECM.

Installation Procedure

    Object Number: 1701061 Size: SH
  1. Connect the ECM connectors to the ECM.
  2. Align the ECM into the mounting base.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the ECM bolts and tighten to 8 N·m (71 lb in).
  4. Connect the negative battery cable.
  5. Perform a crankshaft position system variation learning procedure. Refer to Crankshaft Position System Variation Learn.