Preliminary Procedure

1. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement .
2. Remove the I/P compartment inner panel. Refer to Instrument Panel Compartment Inner Panel Replacement .
3. Disconnect the right air temperature actuator electrical connector.

1

Temperature Actuator Screw - Right (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Temperature Actuator - Right

Tip
Refer to Control Module References for programming and setup information.