Transmission Mount Bracket Replacement - Left Side RPOs LZE/LZ9

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
3. Remove the left front fender liner. Refer to Front Fender Liner Replacement .
4. Support the transaxle.



5. Remove the transaxle bracket to transaxle mount upper nuts.



6. Remove the bolts which secure the transaxle bracket to the transaxle.
7. Remove the transaxle bracket.

1. Position the transaxle bracket to the transaxle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the transaxle bracket bolts.

Tighten
Tighten the bracket bolts to 95 N·m (70 lb ft).

3. Remove the support from the transaxle.



4. Install the upper nuts which secure the transaxle bracket to the transaxle mount.

Tighten
Tighten the upper nuts to 47 N·m (35 lb ft).

5. Install the left front fender liner. Refer to Front Fender Liner Replacement .
6. Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation .
7. Lower the vehicle.

Transmission Mount Bracket Replacement - Left Side RPO LS4