Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the front seat. Refer to Front Seat Replacement - Bucket .

1

Handle, Recliner

Tip
Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle.

2

Handle, Lumbar Actuator

Tip
Pull outward to remove.

3

Knob, Power Seat Switch

Tip
Pull outward to remove.

4

Panel, Seat Cushion Outer Trim

Refer to Seat Cushion Outer Trim Panel Replacement .

5

Cover, Seat Cushion

Tip

1. Release the j-channel from the seat cushion frame.
2. Disconnect the seat cushion heater electrical connector, if equipped.
3. Remove the seat cushion cover and pad as an assembly from the frame.

6

Nut, Front Seat Cushion Frame (Qty: 4)

Tighten
9 N·m (80 lb in)

7

Adjuster Assembly, Front Seat

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Disable the SIR system if working on the passenger seat. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling .
2. Remove the front seat. Refer to Front Seat Replacement - Bucket .
3. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .

1

Nut, Front Seat Cushion Frame (Qty: 4)

Tighten
9 N·m (80 lb in)

2

Adjuster Assembly, Front Seat