Preliminary Procedure

1. Remove the rear wheel liner bolts to the rear fascia. Refer to Rear Wheelhouse Panel Liner Replacement .
2. Remove the rear trim sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .
3. Remove the license the lamp. Refer to Rear License Lamp Replacement .

1

Rear Fascia Retainers (Qty: 4)

2

Rear Fascia Retainers (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

3

Rear Fascia Bolts (Qty: 6)

Tighten
10 N·m (89 lb in)

4

Rear Fascia Top Center Nuts (Qty: 4)

Tighten
10 N·m (89 lb in)

5

Rear Fascia

Tip
Disconnect the electrical connector.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the right and left rear wheel house. Refer to Rear Wheelhouse Panel Liner Replacement.

1

Rear Fascia Screws Qty: 6

Tighten
2 N·m (18 lb in)

2

Rear Fascia Clip Qty: 2

3

Rear Fascia Bracket Screws Qty: 4

Tighten
2 N·m (18 lb in)

4

Rear Fascia Retainers Qty: 4

Tip
Disconnect the lamp connectors.

5

Rear Fascia

Tip
Disconnect the lamp connectors.