Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Power Seats Schematics | |||
1 | Did you review the Power Seat System Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Seats |
2 | Attempt to operate all of the power seat adjuster motors through their full range of adjustment. Do all of the power seat adjuster motors operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Are all of the power seat adjuster motors inoperative? | Go to Step 4 | Go to Step 6 |
4 | Test the battery positive voltage supply circuit to the seat adjuster switch for an open or short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 5 |
5 | Test the seat adjuster switch ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 10 |
6 |
Does the test lamp illuminate when the switch is pressed in both directions? | Go to Step 8 | Go to Step 7 |
7 |
Did you find and correct the condition? | Go to Step 12 | Go to Step 10 |
8 | Inspect for poor connections at the seat adjuster motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 9 |
9 | Replace the seat adjuster motor. Refer to Front Seat Adjuster Motor Replacement . Is the repair complete? | Go to Step 12 | -- |
10 | Inspect for poor connections at the seat adjuster switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 11 |
11 | Replace the seat adjuster switch. Refer to Power Seat Switch Replacement . Is the repair complete? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |