GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 82187  Size: SH
  1. Disable the SIR system. Refer to Disabling the SIR System .
  2. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  3. Remove the upper and lower steering column shrouds.
  4. Remove the steering wheel. Refer to Steering Wheel Replacement in Steering Wheel and Column - Tilt.
  5. Disconnect the 8-way inline connector C205 located at the base of the steering column.
  6. Remove the wire harness straps from the steering wheel column wire harness.
  7. Remove the retaining ring.
  8. Remove the inflatable restraint steering wheel module coil from the steering shaft.

Installation Procedure


    Object Number: 82187  Size: SH
  1. Install the inflatable restraint steering wheel module coil to the steering shaft.
  2. Install the retaining ring.
  3. Route the lower coil wire harness along the steering column and install the necessary wiring harness straps.
  4. Connect the 8-way inline connector C205.
  5. Install the steering wheel. Refer to Steering Wheel Replacement in Steering Wheel and Column - Tilt.
  6. Install the upper and lower steering column shrouds.
  7. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  8. Enable the SIR system. Refer to Enabling the SIR System .