REVISED TORQUE SPEC.FOR CHECK- ING LIMITED SLIP OPERATION

SERVICE MANUAL UPDATE- REVISED TORQUE SPECIFICATIONS FOR CHECKING LIMITED SLIP OPERATION

VEHICLES AFFECTED: 1988 G CAR ------------------

The torque specification for checking Auburn Cone limited slip differential operation with one wheel on the ground has changed. Please revise your 1988 service manual in Section 4B, step 6 to show that the torque should be between 58 N.m (43 lbs.ft.) and 91 N.m (67 lbs.ft.)

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.