Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Instrument Cluster Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the oil pressure indicator lamp illuminate? | -- | Go to Step 3 | Go to Step 6 |
3 |
Is the measured resistance less than the specified value? | OL | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in the YEL/BLK wire between the IP cluster assembly and the oil pressure switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
5 | Repair/replace the IP cluster printed circuit. Is the repair complete? | -- | -- | |
6 | Test the engine oil pressure. Is the engine oil pressure value within the specified range? | 323 to 421 kPa (46.9 to 61.1 psi) at 4000 rpm | Go to Step 7 | Go to Oil Pressure Diagnosis and Testing for 1.0 L or Oil Pressure Diagnosis and Testing for 1.3 L in Engine Mechanical |
7 | Replace the oil pressure switch. Is the repair complete? | -- | -- |
