GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Metro 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Blower Motor Resistor Replacement

Removal Procedure
  1. Remove the powertrain control module. Refer to Powertrain Control Module Replacement in Engine Controls-1.0L or Powertrain Control Module Replacement in Engine Controls-1.3L.
  2. Disconnect the blower motor resistor electrical connector.

    3. Object Number: 354261 Size: SH
  3. Remove the following components from the blower case:
    4. • The 1 screw (3)
    • The blower motor resistor (2)

Installation Procedure

    Object Number: 354261 Size: SH
  1. Install the resistor (2) to the blower case.

    2. Secure the resistor with 1 screw (3).

  2. Connect the blower motor resistor electrical connector.
  3. Install the PCM. Refer to Powertrain Control Module Replacement in Engine Controls-1.0L or Powertrain Control Module Replacement in Engine Controls-1.3L.

Removal Procedure
  1. Remove the powertrain control module (PCM). Refer to Powertrain Control Module Replacement -1.0L, or Powertrain Control Module Replacement -1.3L in Engine Controls.
  2. Disconnect the electrical connector of the blower-motor resistor.

    3. Object Number: 354261 Size: SH
  3. Remove 1 screw (3) and the blower-motor resistor (2) from the blower case (1).

Installation Procedure

    Object Number: 354261 Size: SH
  1. Install the resistor (2) to the blower case (1). Secure the resistor with the 1 screw (3).
  2. Connect the electrical connector of the blower-motor resistor electrical connector.
  3. Install the PCM. Refer to Powertrain Control Module Replacement 1.0L or Powertrain Control Module Replacement 1.3L in Engine Controls.