GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu Classic 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Solvent Container Hose Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 1331351 Size: SH
  2. Disconnect the solvent container washer hose from the windshield washer hose and disengage the hose from the solvent container clips.
  3. Route the hoses downward to allow draining.
  4. Drain the washer solvent from the washer solvent container.
  5. Remove the fender liner. Refer to Front Fender Liner Replacement.

    6. Object Number: 1206992 Size: SH
  6. Disconnect the washer hose and electrical harness from the washer pump.
  7. Remove the solvent container washer hose from the washer solvent container.

Installation Procedure

    Object Number: 1206992 Size: SH
  1. Connect the solvent container washer hose to the washer pump.
  2. Install the solvent container washer hose to the washer solvent container. Ensure that the hose is routed within the channel on the side of the washer solvent container and snapped into the retaining features on the container.
  3. Route the hoses upward and into the solvent container clips.
  4. Connect the washer hose and electrical harness to the washer pump.
  5. Install the fender liner. Refer to Front Fender Liner Replacement.

    6. Object Number: 1331351 Size: SH
  6. Connect the solvent container washer hose to the windshield washer hose.
  7. Fill the washer solvent container with washer solvent.
  8. Close the hood.
  9. Inspect the washers for proper operation.