Engine Flywheel Installation Manual Transmission
Special Tools
J 45059 Angle Meter
For equivalent regional tools, refer to
Special Tools
- Install the clutch pilot bearing.
- Install the flywheel/pressure plate.
Caution: Refer to Fastener Caution in the Preface section.
- Install the flywheel/pressure plate bolts and tighten to
50 N·m (37 lb ft) plus an additional 70 degrees using the
J 45059 meter
.
Engine Flywheel Installation Automatic Transmission
- Install the flywheel.
Caution: Refer to Fastener Caution in the Preface section.
- Install the flywheel bolts and tighten to
70 N·m (52 lb ft).