Removal Procedure
- Remove the oil pan. Refer to
Oil Pan Replacement.
- Remove the oil pump bolt.
- Remove the oil pump and the oil pump drive shaft.
Installation Procedure
Note: Rotate the oil pump drive shaft as necessary in order to obtain the engagement with the oil pump drive unit.
- Install the oil pump drive shaft and the oil pump.
Caution: Refer to Fastener Caution in the Preface section.
- Install the oil pump bolt.
Tighten
Tighten the bolt to 41 N·m (30 lb ft).
- Install the oil pan. Refer to
Oil Pan Replacement.