Fluid Cooler Inlet Hose Replacement. Chevrolet Malibu 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Malibu 🢒 Engine 🢒 Engine Controls and Fuel - 2.2L or 2.4L 🢒 Fluid Cooler Inlet Hose Replacement

Callout	Component Name
1	Transmission Fluid Cooler Pipe Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 22 N·m (16 lb ft)
2	Sealing Washer Tip Remove and discard the sealing washer.
3	Transmission Fluid Cooler Inlet Hose Procedure Disconnect the transmission line from the radiator and transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection. Note the routing of the transmission line to ensure proper installation. Remove the transmission line from the clips securing the line to the transmission and fan shroud. Inspect the transmission fluid level. Refer to Transmission Fluid Check.

Callout

Component Name

Transmission Fluid Cooler Pipe Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
22 N·m (16 lb ft)

Sealing Washer

Tip
Remove and discard the sealing washer.

Transmission Fluid Cooler Inlet Hose

Disconnect the transmission line from the radiator and transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection.
Note the routing of the transmission line to ensure proper installation.
Remove the transmission line from the clips securing the line to the transmission and fan shroud.
Inspect the transmission fluid level. Refer to Transmission Fluid Check.