GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2008
🢒
Malibu
🢒
Engine
🢒
Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L
🢒 Evaporative Emission Canister Purge Tube Replacement
Removal Procedure
Remove the fuel injector sight shield. Refer to
Fuel Injector Sight Shield Replacement
.
Disconnect evaporative emission (EVAP) canister purge tube quick connect fitting (1) at the upper intake manifold. Refer to
Plastic Collar Quick Connect Fitting Service
.
Disconnect EVAP canister purge tube quick connect fitting (2) at the EVAP purge solenoid valve. Refer to
Plastic Collar Quick Connect Fitting Service
.
Remove the EVAP canister purge tube from under the positive crankcase ventilation (PCV) tube and from the vehicle.
Installation Procedure
Install the EVAP canister purge tube to the vehicle and route the purge tube under the PCV tube.
Connect EVAP canister purge tube quick connect fitting (2) at the EVAP purge solenoid valve. Refer to
Plastic Collar Quick Connect Fitting Service
.
Connect EVAP canister purge tube quick connect fitting (1) at the upper intake manifold. Refer to
Plastic Collar Quick Connect Fitting Service
.
Install the fuel injector sight shield. Refer to
Fuel Injector Sight Shield Replacement
.