Preliminary Procedures

1. Remove the radiator inlet hose. Refer to Radiator Inlet Hose Replacement.
2. Remove the right engine mount snubber bracket. Refer to Engine Mount Snubber Bracket Replacement.

1

Water Outlet Housing Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Remove the water outlet housing bolts.

Tighten
10 N·m (89 lb in)

2

Water Outlet Housing

3

Seal

Procedure

1. Remove the water outlet housing seal. Discard the seal.
2. Install a new water outlet housing seal.