GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Malibu 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Range Selector Lever Cable Replacement

Removal Procedure
  1. Set the park brake and chock the wheels.

    2. Object Number: 627381 Size: SH
  2. Fully lift the retainer from the transaxle range selector cable mechanism.

    3. Object Number: 627375 Size: SH
  3. Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin.
  4. Press the locking tabs inward in order to release the transaxle range selector cable from the bracket.
  5. Remove the console. Refer to Console Replacement .

    6. Object Number: 891290 Size: SH
  6. Disconnect the transaxle range selector cable terminal from the shift lever pin.
  7. Pull the lock release (1) and remove the transaxle range selector cable (2) from the console.

    8. Object Number: 294270 Size: SH
  8. Unplug the shift cable grommet at the cowl panel and remove the shift cable from the vehicle.

Installation Procedure

    Object Number: 294270 Size: SH
  1. Install the shift cable through the cowl panel and seat the grommet.

    2. Object Number: 891290 Size: SH
  2. Install the transaxle range selector cable (2) to the console.
  3. Install the lock release (1) to the range selector cable.
  4. Connect the transaxle range selector cable terminal to the shift lever pin.
  5. Install the console. Refer to Console Replacement .

    6. Object Number: 627375 Size: SH
  6. Install the transaxle range selector cable into the bracket.
  7. Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin.

    8. Object Number: 627381 Size: SH
  8. Insert the retainer to the transaxle range selector cable mechanism.
  9. Adjust the automatic transmission range selector cable. Refer to Range Selector Lever Cable Adjustment .