| Table 1: | Instrument Panel Cluster (IPC) |
| Table 2: | Powertrain Control Module (PCM) / Engine Control Module (ECM) |
Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
Dimming Intensity | Special Functions | The instrument panel cluster (IPC) increases or decreases the dimming intensity in increments of 20 percent between a range of 0-100 percent. |
Display Test | Special Functions | The IPC drives all of the gages at or below minimum for a few seconds when you select ON, then drives all of the gages at or above maximum for a few seconds. The IPC Display Test will end after one cycle of the gages sweep. |
Segment Check | Special Functions | The IPC illuminates all sements of the driver information center when you select ON. |
Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
GEN L-Terminal | Special Functions | The powertrain control module (PCM) commands the generator OFF when off is selected from the scan tool. The generator stops generating an output voltage. |
Oil Life Reset | Special Functions | The PCM resets the engine oil life to 100 percent and back to the original value when commanded from the scan tool. |
Malfunction Indicator Lamp (MIL) | Special Functions | The PCM/engine control module (ECM) commands the malfunction indecator lamp (MIL) indicator ON and OFF. |
