For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
Circuit/System Description
This diagnostic procedure applies to serial data indicator(s) located in the instrument panel cluster (IPC) which may include the low fuel indicator.
Reference Information
Schematic Reference
| • | Engine Controls Schematics for the 2.2L engine |
| • | Engine Controls Schematics for the 3.5L engine |
| • | Engine Controls Schematics for the 3.9L engine |
Connector End View Reference
| • | Engine Control Module Connector End Views for the 2.2L engine |
| • | Engine Control Module Connector End Views for the 3.5L engine |
| • | Engine Control Module Connector End Views for the 3.9L engine |
Electrical Information Reference
Scan Tool Reference
Circuit/System Testing
Ignition ON, with the scan tool, perform the IPC Displays Test in the IPC Output Controls. Verify that the low fuel indicator illuminates and turns off after the displays test.
| ⇒ | If the indicator(s) does not perform the IPC Displays Test, replace the IPC. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for the IPC replacement, setup and programming
