GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Malibu 🢒 Engine 🢒 Engine Controls and Fuel - 3.9L 🢒 Air Cleaner Assembly Replacement

Removal Procedure

    Object Number: 1583638 Size: SH
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.

    3. Object Number: 1799763 Size: SH
  3. Remove the air cleaner housing rear bolt.
  4. Reposition the air conditioning (A/C) condenser and evaporator tube clamp as required.
  5. Remove the air cleaner assembly from the upper tie bar.

Installation Procedure

    Object Number: 1799763 Size: SH
  1. Install the air cleaner assembly to the upper tie bar.
  2. Position the A/C condenser and evaporator tube clamp as required.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the air cleaner housing rear bolt.

    4. Tighten
    Tighten the bolt to 10 N·m (89 lb in).


    Object Number: 1583638 Size: SH
  4. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .