Your vehicle is equipped with PASS-Key® III + (Personalized Automotive Security System) theft-deterrent system. PASS-Key® III + is a passive theft-deterrent system.
The system is automatically armed when the key is removed from the ignition.
You do not have to manually arm or disarm the system.
The security light will come on if there is a problem with arming or disarming the theft-deterrent system.
When the PASS-Key® III + system senses that someone is using the wrong key, it shuts down the vehicle's starter and fuel systems. The starter will not work and fuel will stop flowing to the engine. Anyone using a trial-and-error method to start the vehicle will be discouraged because of the high number of electrical key codes.
When trying to start the vehicle if the engine does not start and the security light comes on, there may be a problem with your theft-deterrent system. Turn the ignition off and try again.
If the engine still does not start, and the key appears to be undamaged, try another ignition key. At this time, you may also want to check the fuse, see Fuses . If the engine still does not start with the other key, your vehicle needs service. If your vehicle does start, the first key may be faulty. See your dealer/retailer who can service the PASS-Key® III + to have a new key made. In an emergency, contact Roadside Assistance. See Roadside Assistance Program for more information.
It is possible for the PASS-Key® III + decoder to "learn" the transponder value of a new or replacement key. Up to 10 additional keys may be programmed for the vehicle. The following procedure is for programming additional keys only. If all the currently programmed keys are lost or do not operate, you must see your dealer/retailer or a locksmith who can service PASS-Key® III + to have keys made and programmed to the system.
See your dealer/retailer or a locksmith who can service PASS-Key® III + to get a new key blank that is cut exactly as the ignition key that operates the system.
To program the new key:
- Verify that the new key has "+" stamped on it.
- Insert the already programmed key in the ignition and start the engine. If the engine will not start, see your dealer/retailer for service.
- After the engine has started, turn the key to LOCK/OFF, and remove the key.
- Insert the key to be programmed and turn it to ON/RUN within five seconds of removing the original key.
- Repeat Steps 1 through 4 if additional keys are to be programmed.
The security light will turn off once the key has been programmed. It may not be apparent that the security light went on due to how quickly the key is programmed.
If you are ever driving and the security light comes on and stays on, you may be able to restart your engine if you turn it off. Your PASS-Key® III + system, however, is not working properly and must be serviced by your dealer/retailer. Your vehicle is not protected by the PASS-Key® III + system at this time.
If you lose or damage your PASS-Key® III + key, see your dealer/retailer or a locksmith who can service PASS-Key® III + to have a new key made.
Do not leave the key or device that disarms or deactivates the theft deterrent system in the vehicle.
