Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views DEFINITION: Rear wiper is always ON. | |||
1 | Did you review the Rear Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 |
Is the rear wiper always on? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
3 |
Is the rear wiper always on? | Go to Step 4 | Go to Step 5 |
4 |
Test the rear wiper switch delay/on signal circuit for a short to voltage. Refer to Circuit Testing and to Wiring Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 7 |
5 | Inspect for poor connections at the rear wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 6 |
6 | Replace the rear wiper/washer switch. Refer to Console Replacement . Is the repair complete? | Go to Step 9 | -- |
7 | Inspect for poor connections at the window wiper module-rear. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 8 |
8 | Replace the window wiper module-rear. Refer to Liftgate Wiper Motor Replacement . Is the repair complete? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
