Removal Procedure
- Remove the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the armrest bracket.
- Remove the rear door water deflector, starting at the top (1), pull downward.
Installation Procedure
- Route the electrical connectors through the existing holes in the water deflector.
- Insert the lock knob through the cutout. Start at the upper corners by the locating holes in the water deflector to the holes in the door inner panel (1).
- Secure the outer periphery of the water deflector to the door inner panel. Begin at the bottom center, and work around and upward to the right and the left.