GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Malibu 🢒 Body 🢒 Body Rear End 🢒 Liftgate Latch Striker Replacement

Removal Procedure
  1. Open the liftgate.

    2. Object Number: 1315516 Size: SH
  2. Remove the screws from the liftgate striker.
  3. Remove the liftgate striker from the vehicle.

Installation Procedure

    Object Number: 1315516 Size: SH
  1. Align the liftgate striker to the holes in the liftgate

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the liftgate striker retaining bolts.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Close the liftgate.