Removal Procedure
- Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
- Disconnect the positive battery cable.
- Remove the battery hold down retainer.
Important: Do not tip the battery more than 40 degrees
during removal.
- Remove the battery.
Installation Procedure
Important: Do not tip the battery more than 40 degrees
during battery installation.
- Install the battery to the battery tray.
Notice: Refer to Fastener Notice in the Preface section.
- Install the battery hold down retainer.
Tighten
Tighten the battery hold down retainer bolt to 25 N·m
(18 lb ft).
- Connect the positive battery cable.
Tighten
Tighten the cable bolt to 17 N·m (13 lb ft).
- Connect the negative battery cable bolt. Refer to
Battery Negative Cable Disconnection and Connection
.