ABS: Refer to ABS Description and Operation in Antilock Brake System

Air Bag: Refer to SIR System Description and Operation in SIR

(Export)

BRAKE

Brake: Refer to Brake Warning System Description and Operation in Hydraulic Brakes

Charge: Refer to Charging System Description and Operation in Engine Electrical

Engine Coolant Temperature: Refer to Cooling System Description and Operation in Engine Cooling

Fasten Safety Belt: Refer to Seat Belt System Description and Operation in Seat Belts

High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems

The instrument panel cluster (IPC) illuminates the engine oil pressure indicator when the powertrain control module (PCM) detects low engine oil pressure, and the signal circuit is low. The PCM sends a GMLAN message to the body control module (BCM) indicating low engine oil pressure. The IPC receives a GMLAN message requesting illumination from the BCM.

Low Fuel

Low Fuel: Refer to Indicator/Warning Message Description and Operation

Low Traction: Refer to ABS Description and Operation in Antilock Brake System

MIL: Refer to Powertrain Control Module Description in Engine Controls - 2.2L or Powertrain Control Module Description in Engine Controls - 3.5L.

The instrument panel cluster (IPC) illuminates the SERVICE VEHICLE SOON in the following conditions:

Traction Control Off: Refer to ABS Description and Operation in Antilock Brake System

Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems

The instrument panel cluster (IPC) illuminates vehicle overspeed indicator when the body control module (BCM) detects that the vehicle speed is more than 120 km/h (75 mph). The IPC receives a GMLAN message requesting illumination from the BCM.

AUTO LIGHTS OFF

Refer to Exterior Lighting Systems Description and Operation in Lighting Systems

AUTO LIGHTS ON

Refer to Exterior Lighting Systems Description and Operation in Lighting Systems

BRAKE FLUID

Refer to Brake Warning System Description and Operation in Hydraulic Brakes

CHANGE OIL SOON

The driver information center (DIC) illuminates the CHANGE ENGINE OIL message when the powertrain control module (PCM) determines that the engine oil life is 0 percent. The PCM sends a serial data message to the BCM to request the radio to illuminate the CHANGE ENGINE OIL message in the DIC via the GMLAN serial data link. After the oil is changed, reset the engine oil monitor. Refer to in Maintenance and Lubrication.

CHECK GAS CAP

Refer to Evaporative Emission Control System Description in Engine Electrical

DOOR AJAR

Refer to Door Ajar Indicator Description and Operation in Doors

ENG PWR REDUCED

Refer to Throttle Actuator Control (TAC) System Description in Engine Controls - 3.5L

GATE AJAR

Refer to Luggage Compartment Description and Operation in Body Rear End

ICE POSSIBLE

The radio illuminates the ICE POSSIBLE message when the outside air temperature drops below 2.0°C (36°F). When the temperature rises above 5.5°C (42°F), the ICE POSSIBLE message turns off. The radio receives a GMLAN message indicating the outside air temperature from the body control module (BCM).

KEY FOB BATT LOW

Refer to Keyless Entry System Description and Operation in Keyless Entry

LOW COOLANT

Refer to Cooling System Description and Operation in Engine Cooling

LOW FUEL

The instrument panel cluster (IPC) illuminates the low fuel indicator when the IPC detects that the fuel level is less than 14 percent. The indicator is an LED on the fuel gage. The IPC receives a GMLAN message indicating fuel level percent from the body control module (BCM).

LOW WASHER FLUID

Refer to Wiper/Washer System Description and Operation in Wipers/Washer Systems

POWER STEERING

Refer to Power Steering System Description and Operation in Power Steering System

PUSH PARK PEDAL

Refer to Park Brake System Description and Operation in Park Brake

SERVICE AIR BAG

Refer to SIR System Description and Operation in SIR

TRUNK AJAR

Refer to Luggage Compartment Description and Operation in Body Rear End