Position sensors center position

Steering Position Sensor Calibration

After power steering control module (PSCM), or steering column replacement, the scan tool must be used to calibrate the center position of the steering wheel position sensor. Refer to Control Module Setup .

Torque sensors center position

Torque Sensor Calibration

After PSCM, or steering column replacement, the scan tool must be used to calibrate the center position of the steering shaft torque sensor. Refer to Control Module Setup .

Steering tuning configuration

Steering Tuning Selection

After PSCM replacement, the scan tool must be used to select the steering tuning for the vehicle. Refer to Control Module Setup .