Installation of Fuses Removed for Shipping

This bulletin is being published to emphasize the need to correctly install fuses which have been removed during vehicle shipping.

In particular, please stress to personnel responsible for installing fuses that fuses must be installed in the correct location. Mixing of fuses between locations may result in fuse failure (such as if a fuse of low rating is installed to a position requiring a higher current rating fuse, or worse, a fuse with high current rating will not adequately protect a circuit with a fuse with low current rating specified). Correct fuse locations are shown below.

Dealerships are also reminded that until fuses are installed, various electrical functions will not be operational.

For example, door and trunk remote unlocking will not operate until the instrument panel fuse (F7) is installed. Locks must be operated manually via keys (door lock) and glove compartment release switch (trunk) until this fuse is installed.

Installation on Fuses Removed For Battery Protection During Shipment

(1)	Red, 10A
(2)	Green, 30A
(3)	Red, 10A
(4)	Blue, 15A

LH Cowl Panel Located Fuses

Located in ALL vehicles - 10A (RED) installed in F7 location