GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Back Cushion Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .

    2. Object Number: 291815 Size: MH
  2. Remove the anchor nuts securing the rear seat retainer at the bottom of the seat back (2).

    3. Object Number: 292167 Size: MH
  3. Move the rear seat belts to the sides of the rear seat back.
  4. Grasp the bottom of the seat back and swing the seat back upward in order to disengage the offsets on the upper frame bar from the hangers.

    5. Lift the seat back upward.

  5. Remove the seat back from the vehicle.

Installation Procedure
  1. Move the seat belts to the sides of the seat back.

    2. Object Number: 291815 Size: MH
  2. Position the seat back in the vehicle.
  3. Hook the top of the upper frame bar onto the seat back hangers (1).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the rear seat back anchor nuts (2).

    5. Tighten
    Tighten the rear seat back anchor nuts (2) to 10 N·m (89 lb in).

  5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .