GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 291694  Size: MH
  1. Fold the armrest (2) down.
  2. Remove the armrest pivot bolts (5) and washers (1, 3).
  3. Remove the armrest from the support cover (4) and support bracket (6).
  4. Remove the cover from the support bracket.
  5. Remove the armrest support bracket nuts (7).
  6. Remove the support bracket from the seat.

Installation Procedure


    Object Number: 291694  Size: MH
  1. Install the support bracket to the seat.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the armrest support bracket nuts (7).
  4. Tighten
    Tighten the armrest support bracket nuts to 3 N·m (27 lb in).

  5. Push the support cover to the bracket.
  6. Install the armrest to the support bracket (6).
  7. Install the armrest pivot bolts (5) and washers (1, 3).
  8. Tighten
    Tighten the armrest pivot bolts to 12 N·m (106 lb in).

  9. Return the armrest (2) to the original position.