1. Remove the wiper motor. Refer to Windshield Wiper Motor Replacement .
2. Remove the two boots from the wiper transmission drive shafts.
3. Remove the four screws and the wiper transmission from the tube frame.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the wiper transmission with the four screws on the tube frame.

Tighten
Tighten the four screws to 7 N·m (62 lb in).

2. Install the two boots on the wiper transmission drive shafts.
3. Install the wiper motor. Refer to Windshield Wiper Motor Replacement .