Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 6 | Go to Step 3 |
3 | Check for an open circuit condition or poor connection condition in CKT 91. Is an open circuit condition or poor connection condition present? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the open circuit condition or poor connection condition in CKT 91. Is the repair complete? | -- | -- | |
5 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the replacement complete? | -- | -- | |
6 | Connect a J 35616-200 from wiper motor connector C1, terminal C, to ground. Is the test light on? | -- | Go to Step 10 | Go to Step 7 |
7 | Check for an open circuit condition or poor connection condition in CKT 95. Is an open circuit condition or poor connection condition present? | -- | Go to Step 9 | Go to Step 8 |
8 | Repair the open circuit condition or the poor connection condition in CKT 95. Is the repair complete? | -- | -- | |
9 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the replacement complete? | -- | -- | |
10 | Check for continuity between wiper motor connector C1, terminal A, and connector C2, terminal B, wih a J 39200 . Is continuity present? | -- | Go to Step 12 | Go to Step 11 |
11 | Repair the open circuit condition in CKT 196. Is the repair complete? | -- | -- | |
12 | Check for a poor connection condition to the wiper motor assembly at connector C1. Is a poor connection condition present? | -- | Go to Step 13 | Go to Step 14 |
13 | Repair the poor connection condition at wiper motor connector C1. Is the repair complete? | -- | -- | |
14 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- |
