GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Lumina 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Applique Replacement

Removal Procedure
  1. Open the rear compartment lid.
  2. Remove the backup lamp sockets.

    3. Object Number: 292025 Size: LH
  3. Remove the nuts (3)
  4. Remove the rear compartment lid applique (1,4) from the rear compartment lid.

Installation Procedure

    Object Number: 292025 Size: LH
  1. Install the rear compartment lid applique (1,4) to the rear compartment lid.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts (3) on either side of the backup lamps.

    3. Tighten
    Tighten the rear compartment lid applique nuts to 4 N·m (35 lb in).

  3. Install the upper outboard nuts (3).

    4. Tighten
    Tighten the rear compartment lid applique (outboard) nuts to 4 N·m (35 lb in).

  4. Install the upper inboard nuts (3).

    5. Tighten
    Tighten the rear compartment lid applique (inboard) nuts to 4 N·m (35 lb in).

  5. Install the backup lamp sockets.
  6. Close the rear compartment lid.