GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Lumina 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Adjustment

Up/Down or In/Out Adjustment

    Object Number: 294482 Size: SH
  1. Open the door to access the hinge bolts.

    2. Important: Do not remove the bolts.

  2. Loosen the door side hinge bolts.
  3. Adjust the door up or down and in and out as required.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Tighten the door side hinge bolts.

    5. Tighten
    Tighten the door hinge to door bolts to 33 N·m (24 lb ft).

Fore/Aft Adjustment

    Important: Do not remove the bolts.


    Object Number: 164543 Size: SH
  1. Loosen the body side hinge bolts (1).

    2. Important: Do not remove the cone adjuster bolt.

  2. Loosen the body side hinge cone adjuster bolt (3).

    3. Important: Do not remove the torx™ bolt (2).

  3. Loosen the torx™ body side hinge bolt.
  4. Adjust the door fore and aft as required.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 164543 Size: SH
  5. Tighten the torx™ body side hinge bolt (2).

    6. Tighten
    Tighten the torx™ body side hinge bolt to 10 N·m (89 lb in).

  6. Tighten the cone adjuster side hinge bolt (3).

    7. Tighten
    Tighten the cone adjuster side hinge bolt to 10 N·m (89 lb in).

  7. Tighten the body side hinge bolts (1).

    8. Tighten
    Tighten the door hinge to body bolts to 33 N·m (24 lb ft).