For 1990-2009 cars only
Removal Procedure
- Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
- Remove the energy absorber pad. Refer to Rear Door Energy Absorber Pad Replacement .
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Remove the inner belt sealing strip. Refer to Inner Belt Sealing Strip Replacement .
- Remove the window. Refer to Rear Side Door Window Replacement .
- Remove the outer belt sealing strip. Refer to Outer Belt Sealing Strip Replacement .
- Remove the rear door window weatherstrip screw (2).
- Remove the rear door window weatherstrip (1) from the door.
Installation Procedure
- Position the rear door window weatherstrip (1) to the door.
- Install the window weatherstrip screw (2).
- Position the remainder of the window weatherstrip to the door frame.
- Install the window. Refer to Rear Side Door Window Replacement .
- Install the outer belt sealing strip. Refer to Outer Belt Sealing Strip Replacement .
- Install the inner belt sealing strip. Refer to Inner Belt Sealing Strip Replacement .
- Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Install the energy absorber pad. Refer to Rear Door Energy Absorber Pad Replacement .
- Install the trim panel. Refer to Rear Side Door Trim Panel Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the window weatherstrip screw to 6 N·m (53 lb in).
