Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Use a test light in order to backprobe between the inoperative
door lock switch terminal D and ground.
- While observing the test light, press the inoperative door lock
switch to the LOCK position.
Does the test light illuminate?
| --
|
Go to Step 2
|
Go to Step 3
|
2
| Repair
the poor connection or an open in CKT 195 between the inoperative door
lock switch and S313.
Is the repair complete?
| --
| Go to
Step 4
| --
|
3
|
- Inspect for a poor connection at the inoperative door lock switch.
- If the connection is OK, replace the inoperative door lock switch.
Is the repair complete?
| --
| Go to
Step 4
| --
|
4
|
- Ensure that the ignition switch is in the LOCK position.
- Reconnect any connectors or any components that you removed.
Have all repairs been made?
| --
| Go to
Power Door Locks System Check
| --
|
