GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Lumina 🢒 Body and Accessories 🢒 Doors 🢒 Window Replacement - Door Vent

Removal Procedure
  1. Remove the rear door window. Refer to Rear Side Door Window Replacement .

    2. Object Number: 295317 Size: MH
  2. Remove the vent window screw (3).
  3. Pry back the door window weatherstrip (2) from the channel.

    4. Remove the upper edge of the vent window (1) from the rear door.

  4. Remove the vent window.

Installation Procedure

    Object Number: 295317 Size: MH
  1. Install the vent window (1) to the opening of the door window channel (2) from the inboard vehicle.

    2. Align the top corner of the window to the channel guide pin.

  2. Seat the window in the channel weatherstrip.

    3. Push the bottom of the window upward in order to ensure proper seating.

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the vent window screw (3).

    4. Tighten
    Tighten the vent window screw to 10 N·m (89 lb in).

  4. Install the rear door window. Refer to Rear Side Door Window Replacement .