Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the
Audible Warnings System Check?
| --
| Go
to
Step 2
| Go to
Audible Warnings System Check
|
2
| Inspect
fuse 39 in the fuse block.
Is fuse 39 open?
| --
| Go to
Step 4
| Go to
Step 3
|
3
|
- Turn the ignition switch to the LOCK position.
- Disconnect the seat belt/ ignition key/ lamps alarm electrical
connector.
- Connect a test lamp.
- Probe between the seat belt/ ignition key/ lamps alarm harness
connector terminal D2 and the ground.
Does the test light illuminate?
| --
| Go to
Step 5
| Go to
Step 6
|
4
|
- Replace fuse 39.
- Turn the ignition switch to the RUN position.
- Inspect fuse 39.
Is fuse 39 open?
| --
| Go to
Step 7
| Go to
Step 3
|
5
|
- Inspect the seat belt/ ignition key/ lamps alarm connector terminal D2
for a poor terminal contact
- Replace the seat belt/ ignition key/ lamps alarm if the connector
is good.
Refer to
Multifunction Alarm Module Replacement
Has the repair been made?
| --
| Go to
Step 8
| --
|
6
| Repair a poor connection or an open in CKT 39.
Has the repair been made?
| --
| Go to
Step 8
| --
|
7
| Repair a short to ground in CKT 39.
Has the repair been made?
| --
| Go to
Step 8
| --
|
8
|
- Ensure the ignition is in the LOCK position.
- Reconnect the connectors/components that were removed.
Have all repairs been made?
| --
| Go to
Audible Warnings System Check
| --
|
