1. Remove Fuse 25 from the fuse block.
2. Turn the ignition switch to the RUN position.
3. Use a fused 5 amp jumper in order to probe between the fuse block terminal G6 and ground.

Does the speedometer display km/h?

--

Go to Step 2

Go to Step 3

Repair the poor connection or the open in CKT 1550 between the fuse block terminal G5 and G201.

Is the repair complete?

--

System OK

--

Inspect for a poor connection or an open in CKT 811.

Does a poor connection or an open exist in CKT 811?

--

Go to Step 4

Go to Step 5

Repair the poor connection or the open in CKT 811.

Is the repair complete?

--

System OK

--

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

System OK

--