Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the test light illuminate? | -- | Go to Step 3 | Go to Step 2 |
2 | Replace the turn signal switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Has the repair been made? | -- | -- | |
3 | Using a test light, backprobe between the hazard lamp/turn signal flasher harness connector of connector terminal A1 and ground. Does the test light illuminate? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the poor connection or an open in circuit 1508. Has the repair been made? | -- | -- | |
5 | Using a test light, backprobe between the hazard lamp/turn signal flasher harness connector terminal A1 and terminal B2. Does the test light illuminate? | -- |
Go to Step 7 | Go to Step 6 |
6 | Repair the a poor connection or an open in circuit 150 between the hazard lamp/turn signal flasher harness connector terminal B2 and G205. Has the repair been made? | -- | -- | |
7 | Using a test light, backprobe between the hazard lamp/turn signal flasher harness connector terminal C1 and ground. Does the test light illuminate? | - | Go to Step 9 | Go to Step 8 |
8 | Replace the hazard lamp/turn signal flasher. Refer to Hazard and Turn Signal Flasher Replacement . Has the repair been made? | -- | -- | |
9 | Using a test light, backprobe between connector C201 terminal A1 and ground. Does the test light flash? | -- | Go to Step 2 | Go to Step 10 |
10 | Repair the poor connection or an open in circuit 16. Has the repair been made? | -- | -- |
