Emergency Vehicle Rear Compartment Lid Lamp Replacement RPO T53

1. Open the rear compartment lid.
2. Disconnect the electrical connector(s) from the rear compartment lid lamp(s) to be removed.
3. Remove the bolts retaining the lamp bracket(s) to the rear compartment lid.
4. Remove the rear compartment lid lamp(s) with bracket(s).

1. Install the rear compartment lid lamp(s) with bracket(s) into position on the rear compartment lid.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the rear compartment lid lamp bracket to rear compartment lid retaining bolts.

Tighten
Tighten the rear compartment lid lamp bracket retaining bolts to 4 N·m (35 lb in).

3. Connect the electrical connector(s) to the rear compartment lid lamp(s).
4. Close the rear compartment lid.