Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Inspect the R/CMT REL fuse for an open. Is the fuse open? | -- | Go to Step 7 | Go to Step 2 |
2 |
Does the test light illuminate? | -- | Go to Step 3 | Go to Step 6 |
3 | Connect a fused jumper (15A) to the transaxle range switch harness connector C1, between terminal B and terminal F. Does the test light illuminate? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the poor connection or an open in circuit 24 between the transaxle range switch harness connector C1 terminal F and S405. Has the repair been made? | -- | Go to Backup Lamp System Check | -- |
5 | Adjust/Replace the park/neutral position switch and cable. Refer to Park/Neutral Position Switch Adjustment in Automatic Transaxle. Has the repair been made? | -- | Go to Backup Lamp System Check | -- |
6 | Repair the poor connection or an open in circuit 840. Has the repair been made? | -- | Go to Backup Lamp System Check | -- |
7 | Repair a short to ground in circuit 840 or circuit 24. Has the repair been made? | -- | Go to Backup Lamp System Check | -- |
