Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Are the headlamps bulbs and connectors OK? | -- | Go to Step 2 | Go to Step 7 |
2 |
Does the test light illuminate? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair the poor connection or an open in circuit 11 between S103 and the right high beam headlamp harness connector terminal A. Has the repair been made? | -- | Go to Headlight System Check | -- |
4 | Using a test light, backprobe between the right high beam headlamp harness connector terminal A and terminal B. Does the test light illuminate? | -- | Go to Step 6 | Go to Step 5 |
5 | Inspect for a poor connection or an open in circuit 593. Is there a poor connection or an open in circuit 593? | -- | Go to Step 8 | Go to Step 9 |
6 | Replace the right high beam headlamp. Refer to Headlamp Replacement . Has the repair been made? | -- | Go to Headlight System Check | -- |
7 | Replace the damaged component. Has the repair been made? | -- | Go to Headlight System Check | -- |
8 | Replace the DRL control module. Refer to Daytime Running Lights (DRL) Control Module Replacement . Has the repair been made? | -- | Go to Headlight System Check | -- |
9 | Repair the poor connection or an open in circuit 593. Has the repair been made? | -- | Go to Headlight System Check | -- |
