GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Lumina 🢒 Engine 🢒 Engine Mechanical - 3.8L 🢒 Valve Stem Oil Seal and Valve Spring Replacement

Removal Procedure

Tools Required

    • J 23590 Spark Plug Port Adapter
    • J 38606 Valve Spring Compressor
  1. Remove the valve rocker arm cover(s). Refer to Valve Rocker Arm Cover Replacement and/or Valve Rocker Arm Cover Replacement .

    2. Important: Rotate the engine so that the piston in the cylinder being worked on is at top dead center before removing the valve locks. This will eliminate the possibility of the valve accidentally falling inside the cylinder.

  2. Remove the rocker arm and push rod. Refer to Valve Rocker Arm and Push Rod Replacement .
  3. Remove the spark plug. Refer to Spark Plug Replacement in Engine Electrical.

    4. Object Number: 406031 Size: SH
  4. Install the J 23590 to the spark plug port and apply compressed air in order to hold the valves closed.

    5. Object Number: 406033 Size: SH
  5. Install the J 38606 on the valve spring.

    6. Object Number: 190527 Size: SH
  6. Compress the valve spring using the J 38606 .
  7. Remove the valve locks.
  8. Remove the valve spring and cap.

    9. Object Number: 190567 Size: SH
  9. Remove the valve stem oil seal.
  10. Inspect the valve spring for bent, cracked, or broken parts. Replace the valve spring if damaged. Refer to Cylinder Head Clean and Inspect .

Installation Procedure

Tools Required

    • J 42863 Valve Stem Seal Installation Tool
    • J 38606 Valve Spring Compressor
    • J 23590 Spark Plug Port Adapter

    Object Number: 40071 Size: SH
  1. Place the oil seal over the stem until the seal begins to contact the valve guide.

    2. Notice: Use hand pressure only when installing the valve stem oil seal using the J 41512. Using too much force may cause damage to the oil seal and possibly lead to excessive oil consumption.

    Important: The color of the replacement seal may not be the same color as the original seal. Install the seals in their correct location based on GM part and package description. Make sure that the seal is fully seated on the valve guide.

  2. Push the valve stem oil seal over the valve guide using the J 42863 .

    3. Object Number: 406033 Size: SH
  3. Install the J 38606 on the valve spring.

    4. Object Number: 190527 Size: SH
  4. Compress the valve spring using the J 38606 .
  5. Install the valve spring and cap.
  6. Install the valve locks.
  7. Release the valve spring.

    8. Object Number: 406031 Size: SH
  8. Make sure that the valve locks are seated.

    9. Release the air pressure, and remove the J 23590

  9. Install the spark plug. Refer to Spark Plug Replacement in Engine Electrical.
  10. Install the push rod and the rocker arm. Refer to Valve Rocker Arm and Push Rod Replacement
  11. Install the valve rocker arm cover(s). Refer to Valve Rocker Arm Cover Replacement and/or Valve Rocker Arm Cover Replacement .